|
 DSP Resource Board used by the PIST-2MI+, PIST-8MI+ and PIST-16MI+ PCI cards. - 4 Texas Instruments TMS320VC5510 DSPs with 400 MIPS processing power each.
- 16MB (8 MWords) external SDRAM per DSP.
- PIST ASM (application specific module) interface:
- Data: 4 PCM highways
- Control: 16-bit processor bus
- Can be attached to PIST adapters with PIST ASM connector, providing powerful DSP resources.
- Applications:
- Tone generation/detection
- Voice/data encoding/decoding
- HDLC signaling
- VoIP
Board Connector |
|
Data Interface |
- 4 x 2/4 Mbit/s PCM highways switchable in the time-space switch of the host adapter
|
Control Interfaces |
- PIST ASM 16-bit processor bus. Memory mapped to the host
|
DSP Resources |
- 4 x TI TMS320VC5510; 400 MIPS processing power each
|
DSP Memory |
- 160 KWords internal RAM per DSP
- 8 MWords (16MB) external SDRAM per DSP
|
DSP Programming Interface |
- Texas Instruments C and C++ Compiler, Assembler, Linker
- Texas Instruments Code Composer Studio debugger
|
Debugging Interface |
- JTAG connection on the host adapter, which allows connectivity to standard third party emulator cards
|
Power Requirements/Environmental Data |
- Power consumption: 2.2W
- Temperature: operating, 0 C to +50 C; non-operating, -40 C to +60 C
- Humidity: operating, 5% to 80% RH (%relative humidity) at up to +30 C, and 5% to 30% RH above +30 C up to +50 C non-condensing; non-operating, 5% to 80% RH at up to +30 C, and 5% to 30% RH above +30 C up to +50 C non-condensing
- Altitude: operating, up to 4,600 meters (15,333 feet); non-operating, up to 12,192 meters (50,000 feet)
|
|
Home