Simulator loop cable:

• Twisted loop cable to connect two E1/T1 line interfaces on the PIST PCMCIA or PIST PCI cards (e.g. used for off-line script testing on local computer)
• RJ45 (male) - RJ45 (male) connectors
• 10 cm
• Art.no: 20301

Simulator crossover cable:

• Crossover (twisted) cable to connect one E1/T1 "terminal" interface with one E1/T1 "network" interface
• Twisted pair
• RJ45 (male) - RJ45 (male) connectors
• 2 meters
• Art.no: 20302

Unshielded monitoring cable:

• Monitoring Y-cable connecting the PIST PCMCIA dongles or the PIST PCI Harmonica to the monitoring tapping point
• One monitoring cable for each E1/T1 line interface to monitor
• Unshielded twisted pair (UTP)
• 1 x RJ45 (male) - 2 x RJ45 (male) connectors
• 2 meters
• Art.no: 20303

Shielded monitoring cable:

• Monitoring Y-cable connecting the PIST PCMCIA dongles or the PIST PCI Harmonica to the monitoring tapping point
• One monitoring cable for each E1/T1 line interface to monitor
• Shielded twisted pair (STP)
• 1xRJ45 (male) - 2xRJ45 (male) connectors
• 2 meters
• Art.no: 20304

Note: These monitoring cables are often used together with the T-Attenuator product.

• Coaxial converter cable
• Type 1.6/5.6 (male) - BNC (male) connectors
• 2 meters
• Delivered in pairs
• Art.no: 20312

Note: These cables are often used with the Amplifier product to convert from Type 1.6/5.6 connectors to BNC connectors.

• Coaxial converter cable
• Type 1.6/5.6 (male) - Type 1.6/5.6 (male) connectors
• 2 meters
• Delivered in pairs
• Art.no: 20310