- For use when monitoring E1/T1 line interfaces over long distances (up to 50 meters)
- Compensating for attenuated monitoring tapping points (cross coupling devices) - typically -20dB or -30dB.
- Supporting 0dB, 20dB and 30dB amplification
- Supporting high and low impedance mode
- RJ45, Type 1.6/5.6 (coax) and terminal block connectors
- Can be used as an impedance converter (120 ohm twisted pair - 75 ohm coax) when amplification is set to 0dB
- Delivered with an external power supply
- Art.no: 20200
- Input connectors: RJ45 (120 ohm twisted pair), Type 1,6/5,6 (75 ohm coax) and terminal block
- Output connectors: RJ45 (120 ohm twisted pair) and Type 1.6/5.6 (75 ohm coax)
|
Home