PIST-4-TDM-CSI

Features

The PIST-4-TDM-CSI product has the following features:

PIST-4-TDM-CSI
  • One Texas Instruments TMS320DM6443 dual core processor with 4752 DSP MIPS and 297 MHz ARM9 processing power
  • 256 MB DDR2 memory
  • 128 MB NAND shared flash memory
  • Support for SD-card memory card
  • Support for external USB hard disk drive
  • Two TDM (E1/T1/J1) line interfaces
  • MontaVista Linux on ARM-core
  • DSP/BIOS & Codec Engine Framework on DSP-core
  • 10/100 Mbps Ethernet port for data transfer and remote access
  • Serial port for debugging and application development
  • Web interface for simple configuration and status verification
  • USB 2.0 port
  • Supports standard DSP API for customized DSP applications
  • Compatibility with TI xDM (XDAIS) specification

Technical Specifications

Board Connectors
  • One RJ45 10/100 Mbps Ethernet connector
  • 2 E1/T1/J1 RJ45 connectors
  • Serial port connector
  • USB 2.0 connector
Data Interfaces
  • 10/100 Mbos Ethernet interface
  • USB 2.0 interface
  • 2 E1/T1/J1 interfaces with software switchable line termination (High-Z, 75 Ohm and 100/120 Ohm)
E1/T1/J1 Frame Formats
  • Doubleframe, CRC Multiframe (E1 mode)
  • F4, SF (or D4), ESF (or F24), SLC96 (T1/J1 mode)
E1/T1/J1 Line Codes
  • HDB3, B8ZS, AMI, AMI with ZCS
DSP core and ARM9 Resources
  • DSP Core: 4752 MIPS (C64x+)
  • ARM9 Core: 297 MHz
Memory
  • 256 MB SDRAM (shared by DSP and ARM9 cores)
  • 128 MB Flash memory and support for SD-card memory card
Programming Interface
  • DSP API (for custom DSP core software)
  • HW API (for controlling software)
  • Montavista Linux tools
Debugging Interface
  • Serial port connection allows full access to ARM9 core
Physical Dimensions
  • 5” x 7” (1.75” height). Key-hole mount or desktop option (bumper pads) on the back side
  • 19” x 8” (1.75” height). Rack-mount version is also available. The metal case and can fit 1 or 2 PIST-4-TDM-CSI units.
Power Requirements / Environmental Data
  • Power (5V) is supplied via external power supply (110 - 230 VAC)
  • Power consumption: 3.3W with no USB devices connected
  • Temperature: operating, 0° C to +50° C; non-operating, -40° C to +60° C
  • Humidity: operating, 5% to 80% RH (%relative humidity) at up to +30° C, and 5% to 30% RH above +30° C up to +50° C non-condensing; non-operating, 5% to 80% RH at up to +30° C, and 5% to 30% RH above +30° C up to +50° C non-condensing
  • Altitude: operating, up to 4,600 meters (15,333 feet); non-operating, up to 12,192 meters (50,000 feet)