Spare Parts
Below you find an overview of Utel Systems' spare parts products.
The PIST-2-TDM-PCMCIA Dongle is used with obsolete PIST-2-TDM-PCMCIA cards without on-board ampifiers.
Purchase
The PIST-2-TDM-PCMCIA-Plus/PRO Dongle is used with the PIST-2-TDM-PCMCIA-Plus and PIST-2-TDM-PCMCIA-PRO cards. These dongles are equipped with an E1/T1 amplifier to compensate for attenuated monitoring tapping points.
PIST Harmonica 2 is a 2 x E1/T1 RJ45 connector panel used with PIST-2-TDM PCI/PCIe cards.
PIST Harmonica 8 is a 8n x E1/T1 RJ45 connector panel used with PIST-4-TDM, PIST-8-TDM and PIST-16-TDM PCI/PCIe cards.
The PIST Harmonica Cable is used to connect a PIST Harmonica to a PIST TDM PCI/PCIe card.
The Napatech 1000BASE-T SFP is an electrical connector (RJ45) for used with the Napatech NT4E-4/NTPORT4E-4 Ethernet capturing cards.
The Napatech 1000BASE-LX SFP is an optical connector (single mode fiber) for use with Napatech NT4E-4/NTPORT4E-4 Ethernet capturing cards.
This SFP module is an optical connector (single mode fiber) for use with PIST-2-SDH-PCIe SDH STM-1 capturing cards.
The Monitoring Cable (Y-cable) is used with PIST-2-TDM-PCMCIA-PRO, PIST-2-TDM-ExpressCard, PIST-2-TDM-PCI-Plus, PIST-2-TDM-PCIe, PIST-4-TDM-PCI-Plus and PIST-8-TDM-PCI-Plus cards when used for monitoring.
The Simulation Cable (cross-over cable) is used with PIST TDM cards when used for simulatio in cases where TX needs to be connected to RX and vice versa.