Intel PRO/1000 PT Quad Port Server Adapter

Features

The Intel PRO/1000 PT Quad Port Server Adapter has the following features:

Intel PRO Quad Port Adapter
  • Two Intel 82571GB Gigabit Controllers
  • Load balancing on multiple CPUs
  • Intel I/OAT2
  • Virtualization
  • Interrupt moderation
  • Compatible with x4, x8, and x16 full-height PCI Express slots
  • Support for most network operating systems (NOS)
  • Remote management support
  • Category-5 unshielded twisted pair (UTP), 4-pair cabling
  • RoHS compliant, lead-free technology
  • Intel PROSet Utility for Microsoft Device Manager
  • Advanced cable diagnostics
  • Intel backing

Technical Specifications

General
Product code EXPI9404PT
Connectors Four RJ-45
IEEE standards/network topology
  • 10BASE-T
  • 100BASE-TX
  • 1000BASE-T
Wiring
  • Category-5
  • Unshielded Twisted Pair (UTP)
  • 4-pair
Adapter Product Features
Intel PROSet Utility and Intel PRO Intelligent Install for easy installation
Intel lead-free technology
Plug and play specification support Standard
Auto-negotiation, full-duplex capable
Integrated media access control (MAC) and physical layer (PHY)
Includes a full-height bracket (does not include a low-profile bracket)
RoHs
Cable distance 100 m in Category-5 for 100/1000 Mbps; and Category-3 for 10 Mbps
Network Management
Wired for Management (WfM) baseline v2.0 enabled for servers
DMI 2.0 support, Windows Management Instrumentation (WMI) and SNMP-manageable SMBus support
Remote Installation Services (RIS)
Diagnostics (loopback, testability, PHY register access)
Advanced configuration and power interface (ACPI) 1.0 power management
Wake on LAN support over PCI Express PXE 2.0 enabled through boot read-only memory (ROM)
Network Operating Systems (NOS) Software Support
Microsoft Windows Server 2003, Enterprise, Datacenter (32- and 64-bit)
Microsoft Windows 2000
Red Hat Linux 2.4x or later (32- and 64-bit)
FreeBSD 4.x or later
Novell Netware
Sun Solaris x86, OS 8 and later
SCO Open Server 5, OpenUNIX 8
Intel Backing
Limited lifetime warranty
90-day, money-back guarantee (U.S. and Canada)
Advanced Software Features
Adapter fault tolerance (AFT)
Switch fault tolerance (SFT)
Adaptive load balancing (ALB)
Fast EtherChannel (FEC)
Gigabit EtherChannel (GEC)
Teaming support Scales up to 8 connections
Multiple teams Supports 4 separate teams, maximum
IEEE 802.3ad (link aggregation control protocol)
Test switch configuration Tested with major switch original equipment manufacturers (OEMs)
PCIe Hot Plug/Active peripheral component interconnect (PCI)
IEEE 802.1Q VLANs
IEEE 802.3 (z, ab, u, x) flow control support
TCP checksum offload – transmission control protocol (TCP), user datagram protocol (UDP), Internet protocol (IP)
IEEE 802.1p
TCP segmentation/large send offload
Interrupt moderation
Technical Features
Data rate(s) supported per port 10, 100, and 1000 Mbps
Bus type PCI Express 1.0a
Bus width x4 lane PCI Express, operable in x4, x8, x16 slots
Bus speed (x4, encoded rate) 10 Gbps uni-directional; 20 Gbps bi-directional
EEPROM-SPI and single EEPROM support
Interrupt levels INTA
IEEE support 802.3ab
Hardware certifications FCC B, UL, CE, VCCI, BSMI, CTICK, MIC
Controller-processor Intel 82571GB
Typical power consumption 12.096 W (12 V @ 1.008 A)
Operating temperature 0–55° C
LEDs 4 (1/port, link and speed) solid and blinking
Physical Dimensions
Length 16.32 cm (6.425 in)
Width 11.12 cm (4.376 in)
Height of end bracket 12.09 cm (4.76 in)